Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Warning
•
Always make sure that there are no air bubbles present in the solution
during calibration. This could affect the measurements.
•
If the EC value does not drop to 0, immerse the electrode in ethyl
alcohol and shake gently for 5 to 10 seconds.
•
Make sure the calibration solution is 25°C when calibrating the meter.
Failure to do so may affect the result of the calibration.
•
Avoid placing the meter near ballasts or any other electrical appliances.
Force fields may affect the readings.
•
If during calibration the EC value keeps rising or dropping slowly and
does not stabilise, please replace the batteries and calibrate the
meter. Bad batteries or low power levels may influence the
measurement results.
Replacing the batteries
If the battery indicator at the top right of the display is activated, or if the
display dims, please replace the batteries. To do so, unscrew the top and
replace the 3 x 1.5 Volt AG-13 button cell batteries.
Warranty
These instruments are warranted from all defects in material and
manufacturing for a period of one year from the date of purchase. If during
this period any parts need reparation or replacement and the damage is
not due to incorrect operation by the user, please send the parts to the
dealer or to us and the repair will be free of charge. Please refer to the
exclusion warning.
EN
11
Werbung
Inhaltsverzeichnis
