Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Replacing the electrode
1. Detach the PIN connector of the old EC electrode from the meter.
2. Connect the PIN connector of the new EC electrode to the meter.
3. Calibrate the meter as described in this manual.
4. The meter is now ready for use.
Specifications
Range
Resolution
Accuracy
Calibration
Features
Power supply
Auto. power-off
Calibration indicator With correct calibration
Waterproof
Dimensions
Weight
EN
EC: 0.0 ~ 19.9 mS/cm
Temperature: 0°C ~ 50°C (32°F ~ 122°F)
EC: 0.1 mS/cm
Temperature: 0.1 ºC (1.0 ºF)
EC: ± 2% F.S. (0.0 ~ 4 mS/cm)
Temperature: ± 0.5°C (32°F)
Temperature compensation: 0°C - 50°C
(32°F - 122°F)
EC: 1 point auto 1.4 EC
Battery indicator & automatic temp.
compensation
3 × 1.5 Volt AG-13 button cell battery (included)
After 8 minutes
IP65 (electrodes are IP67 waterproof)
220 x 40 x 40 mm
171 grams
10
Werbung
Inhaltsverzeichnis
