Simfer SM 5658 Bedienungsanleitung Seite 13

Air Outlet Connection
Air discharge can be done by flue connection (air discharge to the external
environment) or by filtering the air back to the environment (carbon filter).
Flue Connected Use
For flue-connected use, Ø150 mm or Ø120 mm spiral pipe and clamp must
be provided from an authorized service or service recommended point.
WARNING: These parts are not included in the
product content and must be purchased.
Note: It is recommended to make a pipe connection of Ø150 mm.
WARNING: In case of installation connected to a chimney,
it is necessary to note all relevant warnings in the safety
and environmental instructions.
Flueless use
WARNING: Since carbon filters are optional parts, they
must be purchased from the service at an additional fee.
Never wash the carbon filter.
The absorbed air is delivered to a flue or outdoor environment
with the help of a pipe attached to the blower motor outlet of
the hood in use with flue connection.
During flueless use, the air sucked by the activated carbon
filter mounted on the blower motor side parts or hood body
is filtered and returned to the environment.
13