Kemper Dusty Evo Betriebsanleitung Seite 72

Carry out the main filter replacement as follows:
Pos. Description
1 Fan unit
2 Filter unit
3 Lower part with dust
collection container
1. Switch off the product and disconnect it from the power supply by
unplugging.
2. Make sure the replacement filter cartridge and the enclosed disposal
bag are available.
3. Open the two upper clamp fasteners (Pos. 4).
4. Lift off the fan unit (Pos. 1) and place it next to the product. Ensure that
the seal is not damaged.
1502937-00
Fig. 25: Access to the main filter
Pos. Description
4
6
Tab. 20: Access to the main filter
- 72 -
Clamp fasteners
Filter cartridge
EN