Qlima LK 3006 Gebrauchsanweisung Seite 49

man_LK3006 ('21) V3.indd 49 man_LK3006 ('21) V3.indd 49
Function Description
ON/OFF
Press this button to turn on the unit at low speed, and display the
room temperature. Press it again to turn off the unit.
SPEED Press this button to switch the unit from LOW –MID-HI Speed, in
Normal Mode.
SUPER
Press this button to turn to the max wind air.
WIND Press it again to turn to original wind setting.
OSC Press this button to start Fan Oscillation with left and right direction.
Press it again to stop Oscillation.
OSC
Press this button to start Fan Oscillation with up and down direction.
Press it again to stop Oscillation.
COOLER Before acting this function, be sure to fill enough water into the
lower water tank. Press this button and the water pump starts run-
ning. The water circulates from the cooler master to allow warm air
to be converted to cool air (warm air combined with water vapor)
and cooler down the temperature effectively.
** For better cooling effect, ice box or ice is recommended to be put
Caution: there is water shortage warning system, if
the water is not enough, the COOLER function will be automatical-
ly stopped, and 3 beep warning sound will be heard, and display
of cooler will be blinking.
TIMER When the unit is in use, you can set the Timer to turn
off the fan after the specified time. Press this button repeatedly to
increase the Timer setting in 1 hour increments (up to a maximum
Press this button to turn the Ionizer feature on/off (the fan
of 9 hours) as indicated on the display. After 5 seconds, the Timer
must be operating for Ionizing to work).
Press this button to turn the Ionizer feature on/off (the fan
ION:
starts. Once the Timer has run out, the unit will turn off.
must be operating for Ionizing to work).
When the ioniser is turned on, it will assist in the purification of
ION:
ION Press this button to turn the Ionizer feature on/off (the fan must
the room air.
When the ioniser is turned on, it will assist in the purification of
be operating for Ionizing to work). When the ioniser is turned on,
the room air.
Press to select Normal Mode, Natural Breeze Mode or Sleep
it will assist in the purification of the room air.
Mode (as indicated on the Display).
Press to select Normal Mode, Natural Breeze Mode or Sleep
WIND:
WIND
Press to select Normal Mode, Natural Breeze Mode or Sleep Mode
Mode (as indicated on the Display).
NORMAL Mode: Fan operates at the speed selected with
WIND:
(as indicated on the Display).
"ON/ OFF" button.
NORMAL Mode: Fan operates at the speed selected with
NORMAL Mode:
"ON/ OFF" button.
NATURAL BREEZE Mode: Fan speed varies automatically to
simulate a breeze* (Logic as shown in the graphic).
NATURAL BREEZE Mode: Fan speed varies automatically to
NATURAL BREEZE Mode: Fan speed varies automatically to simulate
simulate a breeze* (Logic as shown in the graphic).
SLEEP Mode: Fan speed varies automatically for use during
SLEEP Mode: Fan speed varies automatically for use during sleep*.
sleep*.
SLEEP Mode: Fan speed varies automatically for use during
sleep*.
at the upper water tank.
Fan operates at the speed selected with
"ON/ OFF" button.
a breeze* (Logic as shown in the graphic).
7 / 9
7 / 9
4
49
22-12-2021 12:20 22-12-2021 12:20