Qlima LK 3006 Gebrauchsanweisung Seite 47

man_LK3006 ('21) V3.indd 47 man_LK3006 ('21) V3.indd 47
• Unplug the appliance during filling and
cleaning.
If you fail to consult and/or follow up the
rules, instructions and explanation, the
warranty will no longer be valid, and the
manufacturer will no longer deal with
any damage to the appliance and/or your
environment under the warranty.
OPERATION GUIDE
1. Assembly
Position air cooler on a level floor, insert the wheels [8] into the holes posi-
tioned on the bottom of the unit. Insert the power cord winding holders [5]
into the holes at the backside of the unit as shown in the above picture.
2. Filling the tank
Place the air cooler on a level ground and follow the steps below:
1. Take out the water tank; Picture 1
2. Remove the tank completely (Water pump and frame will automatically
raise up) Picture 2.
3. Take the water tank to fill in water or clean;
4. Input the water tank to the right position. Picture 3
picture 1
OPERATION
• Please ensure the unit is in the (OFF) position before plugging into the power
socket.
• Place the unit on a firm level surface.
• Avoid overloading the circuit by not plugging other high wattage products
into the same power socket.
picture 2 picture 3
4
47
22-12-2021 12:20 22-12-2021 12:20