ECG KM 150 Minimo Bedienungsanleitung Seite 8

BEFORE FIRST USE
Clean the coffee grinder according to the instructions in the chapter "Maintenance and Cleaning"
and assemble.
USE OF PRODUCT
1. Press the start button. If the button is blue, the appliance is switched on. If the button is red,
the appliance's battery is flat.
2. The grinder switches off automatically when the grinding is completed. You can switch off the
grinder manually by pressing the button.
3. The connector for the charger is on the top of the product. If the appliance is charging, the
button is red. If it is fully charged, the button is blue.
4. You can charge the grinder using the supplied USB-C cable.
Filling the grinder
1. Twist the top part of the grinder clockwise and separate it from the middle part.
2. Fill the middle part to the level of approximately 80% with coffee beans.
3. Connect the top and middle part, and twist them anticlockwise to the "locked" position.
Setting the grind coarseness
You can set the grind coarseness by turning the grind coarseness dial. This is on the bottom of the
middle part. Turning the dial clockwise makes the grind finer. Turning it anticlockwise makes it
coarser.
MAINTENANCE
1. Switch off the appliance before maintenance. Be extra careful to prevent injury caused by the
burrs.
2. Wipe the outside of the coffee grinder with a damp cloth. Make sure that no water or
moisture gets into the charging connector.
3. Do not immerse the top part in water.
4. Store the grinder in a dry environment.
5. Use the included brush to clean the burrs
8