"Jinbei" App / Bluetooth - Jinbei EF-150Bi Anleitung

Download the "Jinbei" app for iOS from the App Store or the "Studio"
app from the Amazon App Store for Android (iOS 9.0 or higher, And-
roid 5.0 or higher).
Connection with the Smartphone
1. Activate Bluetooth®* on your smartphone.
2. Turn on the Jinbei EF-150Bi and activate Bluetooth®* in the settings
menu by pressing the WiFi settings button [11] and turning the
function knob [12] to reach the WiFi setting "Off". Then press the
Bluetooth®* switch / reset [10] to activate Bluetooth®*.
3. Open the "Jinbei" app, the connection with the smartphone will be
established automatically.
Note: If you want to connect the LED continuous light with the app
on another smartphone, go to the menu to reset the Bluetooth®*
signal.
Note:
– The connection is established using "Bluetooth®* Low Energy"
(BLE). A location release of the app is necessary for this. The con-
nection to the LED continuous light is established directly in the
app.
"Jinbei" App / Bluetooth®*
30