Technaxx TX-22+ Gebrauchsanleitung Seite 11

Playback MP3/WMA format via USB device or SD card
1. Turn the volume knob (14) to turn the device on.
2. Following the illustration above, insert a USB device face up into the USB
port, making sure it is fully inserted. Alternatively, insert a memory card in the
direction of the arrow (as shown on the label next to the memory card slot),
making sure to insert it straight without bending.
IMPORTANT: Connecting the USB device upside down or backwards could
damage the audio system or storage media (USB drive, SD card). Check to
ensure the direction is correct before connection.
3. Set the function selector to USB/SD mode. (If you have both a USB device
and a memory card inserted, press the MODE button to toggle between USB
and SD mode.) The system will start reading the storage medium
automatically after mode selection and will display the total number of
MP3/WMA files.
4. The system will then start audio playback from the media storage device
(USB or SD card) automatically.
Playback from Bluetooth enabled Smartphone's
1. Turn the volume knob (14) to turn the device on.
2. Set the function selector (4) to BT mode.
3. Open the Bluetooth on your Smartphone and search for the Bluetooth name
"Technaxx TX-22+" to connect.
4. When successfully connected you hear a confirmation sound.
5. Select NEXT+ or PREV– (Skip+ or Skip–), Play/Pause key, to navigate to
your playlist.
Note:
 Under this function, turntable function will be stopped automatically.
 When you turn on the device and activate "Bluetooth mode" again, the last
connected Smartphone will be connected automatically!
11