Safety Equipment Of Lbm 290; Residual Risks - HOLZMANN-MASCHINEN LKM 1080 Betriebsanleitung

A first aid kit in accordance with DIN 13164 should always be readily
available for a possible accident. Initiate the violation in accordance with
the necessary first aid measures. When requesting support, provide the
following details:
1. Place of accident
3. Number of injured people
12.4

Safety equipment of LBM 290

In construction of the machine, the following protective devices are provided:
• EMERGENCY STOP switch. Make sure it is functioning at periodic intervals.
• Protective cover chuck. It is strictly forbidden to use the machine in operation, when the
protective cover is not closed.
• Motor thermal switch. Automatically turns the machine off when it overheats.
12.5

Residual risks

Also in compliance with all safety regulations and when used properly, the following residual risks
must be observed:
• Risk of injury to the hands / fingers through the rotating drill bit during operation.
• Risk of injury from contact with live electrical components.
• Risk of injury due to breakage or being thrown out of the drill, especially under heavy
congestion.
• Hearing damage unless precautions have been taken by the user of hearing protection.
• Risk of injury to the eye by flying debris.
• Risk of inhalation of toxic wood dust in treated workpieces.
These risks can be minimized if all safety rules are applied, the machine is properly maintained
and serviced the machine as intended and is serviced by a trained service professional.
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
LANGLOCHBOHRMASCHINE / MORTISING MACHINE LBM 290K / LBM 290KAL
N O T I C E
Emergency procedure
2. Type of accident
4. Injury type(s)
SAFETY
Seite 20