[P-3] Installing The External Speakers - Mitsubishi Electric LDT462V Benutzerhandbuch

P-3 Installing the external speakers
How to install the external speakers
1. Connect the speaker output connectors on the monitor and external speakers (commercially available) using speaker cables.
Insert the left speaker cable into the SPEAKER (S) terminal (L) on the monitor, and insert the right speaker cable into the
SPEAKER (S) terminal (R).
NOTE:
Match the polarity of the speaker cables and that of the terminals (+ (red)/- (black)).
Unmatched polarity may cause problems with audio output.
Specifi cations of the recommended speaker:
Rated input: 10 W
Impedance: 8 Ω (left), 8 Ω (right)
CAUTION:
Use speakers that meet the specifi cations. Otherwise, the monitor or the speakers may have trouble.
Right speaker
(commercially
available)
Red(+)/Black(-)
To speaker terminal (R)
All manuals and user guides at all-guides.com
SPEAKER (S)(R)
Red(+)
Black(-)
English-16
SPEAKER (S)(L)
Red(+)
Black(-)
Carry out as necessary
Left speaker
(commercially
available)
Red(+)/Black(-)
To speaker terminal (L)