Installing In The Portrait Position; Installing The Main Power Switch Cover - Mitsubishi Electric LDT462V Benutzerhandbuch

P-2 Installing the monitor (continued)

Installing in the portrait position

The monitor can be installed in the portrait position.
Ensure that the monitor is oriented as shown below.
CAUTION:
• The operating environmental condition (temperature) when
the monitor is in the portrait position is 5˚C to 35˚C.
• Proper operation of the monitor is not guaranteed when it is
not mounted as shown below (upside down, face up, face
down, etc.).
• When mounting an OPS-compliant computer (commercially
available), be sure to set COOLING FAN to ON using
SCREEN SAVER in the CONFIGURATION1 menu of the
OSD screen function. If it is set to AUTO, the life of the
computer may become shorter than that with it set to ON or
the computer may have trouble.
• In the portrait position, the lifetime of the fl uorescent tube
(backlight) is shorter than that when the monitor is in the
landscape position.
Installation in the portrait position
The " " logo should be on the LEFT side when
viewed from the front of the monitor.
Landscape
90°
logo
All manuals and user guides at all-guides.com
Clockwise
English-15
Face-up
Face-down
Operation environment for portrait installation
When the monitor is installed in the portrait position, the
following conditions should be satisfi ed.
Temperature 5 - 35°C / 41 - 95°F
Humidity 20 - 80% (without condensation)

Installing the main power switch cover

Attach the main power switch cover (accessory) and secure
it using a screw as needed, to prevent the main power switch
from being operated.
Main power switch
cover (accessory)
NOTE:
Once you attach the main power switch cover, you cannot turn
on or off the main power switch.
Carry out as necessary
Screw for securing the
main power switch cover
(accessory)