Herunterladen Inhalt Inhalt Diese Seite drucken

Important Warnings; Accessories; Maintenance And Cleaning - Zelmer ZHD8470 Benutzerhandbuch

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 9
WARNING: Do not use this device near to bathtubs,
showers, sinks or other tanks that contain water.
This symbol means that the device should not
be used near bathtubs, showers, sinks or other
water containers.

IMPORTANT WARNINGS

This appliance is designed for home use and should never be used for commercial or industrial use
under any circumstances.
Prior to plugging in the product, check that your mains voltage is the same as the one indicated on the
product label.
The mains connection cable must not be tangled or wrapped around the product during use.
Do not pull on the connection cord in order to unplug it.
Proceed according to the conservation and cleaning section of this manual for cleaning.
Do not use the product to warm up animals.
Unplug the product immediately from the mains in the event of any breakdown or damage and contact
an authorised Technical support service.
In order to prevent any risk of danger, do not open the device. Only qualified technical personnel from
the brand´s Official Technical support service may carry out repairs or procedures on the device.
Any incorrect use or improper handling of the product shall render the warranty null and void. Only an
authorised technical support service centre may carry out repairs on this product.
B&B TRENDS S.L. disclaims all liability for damages that may occur to people, animals or objects, for
the non-observance of these warnings.
INSTRUCTIONS FOR USE
Select the speed selector (6) and select the desired temperature with the temperature selector (5). Press
the cold air button (3) in order to set your hair style and achieve a perfect finish. The air filter (2) can be
cleaned by pressing the index finger and thumb inwards and pulling counter clockwise.

ACCESSORIES

Concentrator (1) to achieve perfect straightening, pressing slightly to position it.
Select the speed selector (6) and leave it in the 0 position in order to turn off the device, prior to
unplugging it from the mains

MAINTENANCE AND CLEANING

Unplug the product when you do not intend to use it for an extended period of
time to prolong its shelf-life. Allow the device to cool down prior to storage.
Ensure that the device is unplugged prior to cleaning it.
This device may only be cleaned with a damp cloth, and chemical products must never be used for the
same.
EN
PL
7

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis