How To Remove The Battery Pack - Vektro DELUXE Bedienungsanleitung

 Do not expose the battery to fire or intense heat as this may result in an
explosion.
CAUTION!
If a battery leak occurs, avoid any contact with the leaking fluids and place the damaged
battery in a plastic bag.
If leaking fluids come in contact with skin and clothing, wash immediately with plenty
-
of soap and water.
-
If leaking fluids come in contact with eyes, do not rub them and immediately flush them
with cool running water for at least 15 minutes. Seek medical attention as soon as
possible.

How to remove the battery pack

Recommended tools (not included): Screwdriver.
WARNING! The pool vacuum must be disconnected from the supply mains
before removing the battery pack.
1. Place the pool vacuum on a flat surface. Use the screwdriver to unfasten
the screws on the back cover. Remove the battery from the chamber.
2. To detach the battery connection wire, press on the clip of the connector
to pull it out. NOTE: Wrap the connector immediately with insulating tape
in order to avoid any short circuit caused by the contact of both wire
terminals.
(To be carried out by authorized technician)
18