Battery Disposal - Vektro DELUXE Bedienungsanleitung

1. Use a pair of pliers to catch the hook at the end. Press on the hooks and push them
inside the hole of the hinge as shown.
2. As the torsion spring will eject as it leaves the pin, be sure to cover the spring with a
piece of cloth as you pull the pin. Grasp the top round end of the pin with a pair of
pliers. Apply force to pull the pin completely out of the hinges.
3. Insert the flat end of the spring into the hole at the bottom of the post.
4. Use a finger to hold the spring underneath and align the hinges as shown. Ensure
the round hook end is placed underneath the bench as shown.
5. Align and insert the pin all the way through the spring hole and opposite hole.

BATTERY DISPOSAL

Your pool vacuum is equipped with a maintenance-free rechargeable lithium-ion battery
pack, which must be disposed of properly. Recycling is required; please contact your local
authority for more information.
WARNING! Never attempt to disassemble a battery pack
 Remove all personal items such as rings, bracelets, necklaces, and
watches when the battery pack is unwired from the pool vacuum.
 A battery can produce a short circuit current high enough to weld a ring (or
similar item) to metal, causing a severe burn in the process.
 Wear complete eye protection, gloves, and protective clothing when the
battery pack is being removed.
 Avoid touching the wires altogether and avoid contact between them and
any metal items, which could cause sparking and/or short circuit the battery.
 Never smoke or allow a spark or flame in the vicinity of the battery or the
pool vacuum.
(To be carried out by authorized technician)
17