Herunterladen Inhalt Inhalt Diese Seite drucken

Using The Remote Control; Batteries; Cleaning And Maintenance - Vitrifrigo ROADWIND 7000T Handbuch

Dachklimaanlage
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

9
Using the remote control
EN
The air conditioner can also be controlled by the infrared remote control provided. The
buttons of the remote control, and their function, are the same as those on the control
panel.
Point the remote control at the sensor on the front of the unit. The maximum operating
angles are 30° horizontally and 20° vertically. There should be no obstacles between
the remote control and the sensor. In order to work properly, the remote control must
be used at a maximum distance of 2.5 meters (8 feet) from the unit. The transmission
window of the remote control and the sensor must be kept clean. Direct sunlight can
affect the operation of the remote control.
9.1

Batteries

The remote control uses 2 AAA (LR03, MN2400) batteries. Use only batteries which
do not contain harmful substances (lead, cadmium or mercury). Replace discharged
batteries with new ones immediately. Do not use old and new batteries or different
types of batteries at the same time. Do not use rechargeable batteries. When replacing
batteries, remove the lid of the rear compartment and insert the new batteries,
observing the polarity. Polarity inversion may damage the remote control irreparably.
Replace the battery compartment cover.
The batteries should be removed if the remote control is not used for long periods.
10

Cleaning and maintenance

In order to ensure proper operation and reliability for the product over the long term,
simple cleaning and maintenance operations are required from time to time. Before
carrying out any cleaning and/or maintenance work, make sure that the air conditioner
is not connected to the power supply. Do not use abrasive products, corrosive detergents
or solvents when cleaning. When washing the vehicle, do not direct the water jet at
the ventilation grilles. Do not use hot water for cleaning the plastic parts, as this could
cause them to deform.
Cleaning the condensing unit and external heat exchanger
32

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis