Radson ULOW-E2V Bedienungsanleitung Seite 10

Turning on the Radiator Control
Boost
The radiator control of the E2 low-temperature radiator is
GB
turned on by pressing the ON/OFF key.
DE
NL
FR
Boost Mode:
In this operating mode, the yellow temperature symbol flashes
In order to achieve the required room temperature as quickly as
possible, activate the boost mode by pressing the
activate the maximum heating output for a maximum of 120 min. As
soon as the desired room temperature has been achieved, comfort
mode will automatically be re-activated. Boost mode can be
stopped any time by pressing the
10
Ulow E2V • 2022-04-01
!
Important in case of first start-up:
During the first start-up, please note that the
radiator control will be in heating mode with a
pre-set target room temperature of 22°C.
Changes in heating operation:
The red heating symbol is lighted. The desired room
temperature can be set from 18°C to 26°C in steps of
0.5°C. Use the UP and DOWN
6 7
key.
Boost
key.
8
key. This will
Boost
.