Technical Data - Thomashilfen ThevoautoActiv 800 Gebrauchsanweisung

Instructions for Use – ThevoautoActiv 800
ThevoFloor – Floor bedding system (Fig. 4)
ThevoFloor is suitable for use at home and in professional care settings and allows patients to lie low to the floor. This
reduces the need for measures which infringe on the freedom of the user and prevents falls out of bed. The system is
comprised of:
• two wall parts (foam with incontinence cover)
• connecting belt
• cover strip for the hook and loop fastener
• A mattress and a system of suspensions with the MiS micro-stimulation effect are used that promote natural move-
ment and the user's body awareness.
The system can be designed to suit the user. A standard Thevo mattress measuring 140 x 200 cm fits. Other sizes are
available on request.
ThevoFloor is used in the corners of rooms. The Thevo mattress selected has to be appropriate for the indication and
weight of the patient in question.
Put both wall parts on the walls in the corner of the room. Make sure that the hook and loop strip on the front of the
short, top-wall part faces the hook and loop strips on the front of the longer side wall part (Fig. 5). Connect the wall
parts firmly with the hook and loop strip. The cover strip can be put on the hook and loop fastener.
Pull the supplied connecting belt through the loops in the cover of the wall parts (Fig. 6).
Put the mattress red side up in the corner of the room. The top of the mattress should face the short part of the wall.
Bring the connecting belt around the mattress. Adjust the length of the belt so that the wall parts are securely connected
with the mattress (Fig. 7).
ThevoFloor wall parts
Length
Height
Width
Rescue belt system (Fig. 8)
With the rescue belt system bedridden patients can be removed quickly from danger. The rescue belt system is integrat-
ed into the cover of the mattress. The patient is secured by two hook and loop safety belts (at the chest and thigh). In an
emergency, the hook and loop belts are pulled over the mattress, bedding, and patient and are connected. This way the
patient and the bedding are secured quickly and easily to the mattress. The patient's arms are under the covers so that
they are not injured during transport.
Using the pull straps at the top and foot of the bed the mattress, patient, and bedding are pulled out of the bed at a 90°
angle. This way the patient can be evacuated horizontally and vertically from danger. The mattress slides very easily
on all floor types. There are two lifting straps on each long side which allow emergency personnel to take the patient
without transferring them from the bed.
The fabric of the belts is 100% polyester and is free of chemicals. This makes them non-irritant and also suitable for
patients with allergies.
Maximum load capacity: up to 150 kg / 330.7 lbs
All users have to be familiar with how the product works. This way in an emergency the user can be removed quickly
from the product.

Technical Data

ThevoautoActiv 800 50
Overall dimensions (w x l)
Height
Weight
max. user weight
16
Top part
140 cm / 55.1"
80 cm / 31.5"
8 cm / 3.1"
90 x 200 cm / 35.4 x 78.7"
19 cm / 7.5"
depending on option approx. 20 - 25 kg / 44.1 - 55.1 lbs
50 kg / 110.2 lbs
Side part
208 cm / 81.9"
80 cm / 31.5"
8 cm / 3.1"
100 x 200 cm / 39.4 x 78.7"
19 cm / 7.5"
50 kg / 110.2 lbs
2021-04