Levenhuk Wezzer PLUS LP10 Bedienungsanleitung Seite 4

Levenhuk Wezzer PLUS LP10 Thermohygrometer
EN
The kit includes: thermohygrometer, USB cable, user manual, and warranty.
Caution! Please remember that mains voltage in most European countries is 220—240V. If you
want to use your device in a country with a different mains voltage standard, remember that
use of a converter is absolutely necessary.
Getting started
• Connect the power cable to the device and the DC adapter (not included) via a USB plug
and connect to the AC power supply; or
• Open the battery compartment cover (7) and insert 3 batteries according to the correct
polarity. Close the cover.
NOTE! It is recommended to use an adapter for the continuous operation of the base station,
although battery power is also possible.
• Wait until the indoor temperature is displayed on the base station.
Time setting
Press the SET button and hold it for 3 seconds. The digits that are to be set are flashing. Press
UP or DOWN to change the value, and then press SET to continue.
The setting order: Year > Month > Date > Hours > Minutes.
The language and the selected abbreviations for each day of the week are shown in the following table.
Language Monday
English, EN MON
Backlight
Press the LIGHT button to turn on the backlight.
Specifications
Type
Air humidity, units of measurement
Operating humidity range
Temperature, units of measurement
Operating temperature range
Time format
Weekday display language
Screen
Power supply
USB cable
Dimensions
The manufacturer reserves the right to make changes to the product range and specifications
without prior notice.
Tuesday Wednesday
TUE WED
thermohygrometer
% (RH)
10... 99%
°C
–10... +50 °C
24 hours, 12 hours
English
color, with an LED backlight
AC/DC adapter 5V 500 mA (not included), З ААА batteries
(not included)
1.5m (4.9ft.), included
200x25x200 mm (7.8x0.9x7.8in.)
Thursday Friday
THU FRI
4
Saturday Sunday
SAT SUN