Advance ALPHA 4 HIKE Handbuch Seite 10

Materials used
Leading edge:
Skytex PA 6.6, 40, deperlant
Top surface and bottom surface:
Skytex PA 6.6, 27, classic
Supported and unsupported ribs:
Skytex PA 6.6, 40, classic
Enclosing strap of the leading edge and trailing edge:
Polyester laminated, 20 mm
Enclosing strap of the leading edge lower surface:
Polyamid, 16 mm
Lines:
· Technora (Aramid), LTC 200 / 160 / 120, unsheathed UV coated,
1.3 mm / 1.2 mm / 1.1 mm (main lines)
· Technora (Aramid), LTC 120 / 080 / 065 unsheathed UV coated,
1.1 mm / 0.7 mm / 0.65 mm (2nd level)
· Technora (Aramid), LTC 080 / 065 / 045 unsheathed UV coated,
0.7 mm / 0.65 mm / 0.55 nn(1st level)
· DFLP 200 / DSL 70, Dyneema/Polyester (brake lines)
Risers:
Polyester Technora (Aramid), 13 mm – 1000 kg
Quick links:
Maillon Rapide, Inox stainless, 3.5 mm –750 kg
Certifi cation
The ALPHA 4 HIKE has been granted LTF 1-2 and EN B Certifi ca-
tion. This approval applies to all sizes of the ALPHA 4 HIKE in unac-
celerated and accelerated fl ight. The certifi cation reports can be seen
on www.advance.ch.
10