Safety Instructions; Health Hazard; Operating Determinations - EuroLite AKKU LED BC-9 Bedienungsanleitung

SAFETY INSTRUCTIONS

The protective shield has to be replaced when it is obviously damaged,
so that its function is impaired, e. g. due to cracks or deep scratches!
This device has left our premises in absolutely perfect condition. In order to maintain this condition and to
ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions and warning
notes written in this user manual.
Important:
Damages caused by the disregard of this user manual are not subject to warranty. The dealer
will not accept liability for any resulting defects or problems.
Please make sure that there are no obvious transport damages. Should you notice any damages on the
power unit or on the housing, do not take the device into operation and immediately consult your local
dealer.
The device falls under protection-class III. The device may only be recharged with the enclosed mini
USB/antenna cable via a PC or via an external charging device.
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it
on immediately. The arising condensation water might damage your device. Leave the device switched off
until it has reached room temperature.
Never look directly into the light source, as sensitive persons may suffer an
epileptic shock (especially meant for epileptics)!
Keep away children and amateurs!

OPERATING DETERMINATIONS

The AKKU LED BC-9 Beam Effect is a light effect unit which produces unique mirror ball effects. The light
effect uses bright red, green and blue LEDs with a long life.
The light effect is provided with two built-in loudspeakers and an audio player for MP3 files from USB storage
devices and SD (HC) cards.
The light effect is designed for home use.
The device can be operated with a direct voltage of 5 V, DC or via the integrated lithium ion rechargeable
battery (3.7 V 1000 mAh).
This product was designed for indoor use only.
Light effects are not designed for permanent operation. Consistent operation breaks will ensure that the
device will serve you for a long time without defects.
Do not shake the device. Avoid brute force when installing or operating the device.
When choosing the installation spot, please make sure that the device is not exposed to extreme heat,
moisture or dust.
This device must never be operated or stockpiled in surroundings where splash water, rain, moisture or fog
may harm the device. Moisture or very high humidity can reduce the insulation and lead to mortal electrical
shocks. When using smoke machines, make sure that the device is never exposed to the direct smoke jet
and is installed in a distance of 0.5 meters between smoke machine and device. The room must only be
saturated with an amount of smoke that the visibility will always be more than 10 meters.
CAUTION!

HEALTH HAZARD!

10/14 00093242.DOCX, Version 1.0