Weekly Timer Operation - Hitachi RAK-50PPA Bedienungsanleitung

WEEKLY TIMER OPERATION

NOTE
Up to 6 programs can be set per day. Setting ON TIMER or OFF TIMER for each program number
●
can be at random. When pressing
program number will automatically arranged so that program number 1 shall have the earliest time and
program number 6 shall have the latest time.
If the setting time is the same, Priority will be given to the latest reservation contents.
CAUTION ! If the remote controller is left idle and
●
after reservations have been made , all current reservations will be lost.
5. Press
reservation.
5
6. Press
7. Press (TEMP
8. Press
number, ON reservation, setting temperature will light up.
continuously blinks. If reservation is not complete, settings will not be
6
stored in memory.
To continue with the reservation, press
Follow step 3 to 8 for reservation.
9. After all the reservations have been set, press
while directing the remote controller towards the indoor unit for about 3
seconds. Timer lamp on the indoor unit will blink rapidly.
After beep sound emitted from indoor unit, TIMER lamp will light up.
7
Please ensure that the TIMER lamp lights up.
This indicates that the reservation has been stored in the indoor unit and
Timer function has been completed.
The reservation contents will appear on the remote controller display.
If TIMER lamp on the indoor unit does not light up, press
●
button while directing the remote controller towards the indoor unit for
about 3 seconds.
8
CAUTION ! Do not press
●
setting because this will result in all reservation contents to be lost.
The reservation contents will not stored in the indoor unit until
●
(SEND) button has been pressed.
9
(SEND) button, the set ON TIMER or OFF TIMER for each
(ON-OFF TIMER) button to select ON TIMER or OFF TIMER
(TIME) button to set time reservation.
or ) button to set temperature reservation.
(OK) button. The reservations are set.
(SEND) button is not pressed within 3 minutes
– 20 –
Day, program
(SEND) button
(CANCEL) button during reservation
will be
buttons.
(SEND)