Inklang AYERS Three Bedienungsanleitung Seite 16

english - EN 5
ASSEMBLY OF THE KNURLED FEET
1. Place the loudspeaker in its final position and place two knurled feet on the left and right of the loudspeaker
2. Carefully tilt the loudspeaker to the left, screw the knurled feet into the thread as far as possible and put it down carefully
3. Repeat on the right side of the speaker
4. Make sure that the loudspeaker is in its final position and does not tip over. Compensate for this by unscrewing individual knurled feet
UNPACKING SET UP CONNECT BURN IN MAINTENANCE WARRANTY