Ayce SEATTLE C8490A Gebrauchsanweisung Seite 125

3. If the signal for Ch 1~8 has discontinued and does not
recover within 1 hour, the signal icon will disappear.
The temperature and humidity will display "Er" for
the corresponding channel.
4. If the signal does not recover within 48 hours, the "Er"
display will become permanent, you need to reset the
corresponding sensor and then press [ SENSOR ]
key to pair up the sensor again.
Note:
After replacing the batteries of the wireless sensor
or the unit fails to receive wireless sensor signal of
a specified channel, press [ SENSOR ] key to manually
receive that sensor signal again.
VIEW INDOOR AND MULTIPLE
WIRELESS SENORCHANNELS
1. In normal mode, press [ CH / + ] key to switch the
display between IN and CH 1~8.
2. In normal mode, press and hold [ CH / + ] key for
2 seconds to enter auto-cycle mode, After a "bi"
125 |126
GB