Loading And Storing Programs; Channel Settings; Adjusting The Flat Mode - Omnitronic DEQ-231 Bedienungsanleitung

Press the Frequency-button and adjust the desired frequency (between 20 Hz and 20 kHz) via the Jog-
wheel. Press the Frequency-button again and adjust the Gain-level via the Jog-wheel. Press the Frequency-
button again to memorize the settings.

Loading and storing programs

With the DEQ-231, you can store up to 100 different programs.
Storing the settings: Press the Program-button. Press button B. Now you can store the adjusted settings on
an indidvidual program number between 1 and 100.
Loading a program: Press the Program-button. Press button A.
Adjust the desired program by turning the Jog-wheel. Confirm with button B or cancel with button C.

Channel settings

Via the button CH-SEL, you can adjust the desired channel, mono „L" or „R". For adjusting stereo „L & R"
hold the Edit-button until the display shows „L & R".

Adjusting the flat mode

Press the Edit-button. Press the button B in order to enter Flat-mode. All frequencies have been set to 0 dB.
20/22 10356120_V_1_0.DOC