Frontpanel; Rearpanel - Omnitronic DEQ-231 Bedienungsanleitung

Frontpanel

DIGITAL SERIES
DEQ-231
31 BAND DUAL EQ
1) LCD DISPLAY
To display functions and operating status.
2) JOG-WHEEL
For adjusting the parameters. Turning this wheel to the right increases the parameter value and turning it to
the left decreases them.
3) PROGRAM BUTTON (Display A)
To memorize up to 100 programs.
4) CHANNEL SELECT BUTTON (Display B)
To select between the channels L, R, L & R
5) EDIT BUTTON (Display C)
To copy channels Left and Right and for FLAT-mode.
6) FREQUENCY/GAIN/MIDI BUTTON
To set frequencies and gain level.
7) LOCK/ESCAPE BUTTON
Press this button to cancel the previous editing status. Hold this button for about 3 seconds to activate the
LOCK funktion (display shows „LOCK"). All functions are locked now. To undo this function, hold this button
again for about 3 seconds until „LOCK" disappears.
8) BYPASS BUTTON
This switch allows instant comparison of the original sound (display shows „BYP") with the equalized sound
(display shows „GEQ").

Rearpanel

9 10
www.omnitronic.com
115 V
BALANCED INPUTS
2=SIGNAL
230 V
3=SIGNAL
(9) AC CONNECTION
Plug the power supply cable in here.
POWER SWITCH Turns power to the equalizer on and off. Be sure to power-up before your power amplifier
is turned on to avoid loud transients which could damage your speakers or annoy your audience.
(10) AC VOLTAGE-SELECTOR
Make sure that the selector is properly set.
(11) MIDI OUT-SOCKET
(12) MIDI THRU- SOCKET
1
DEQ-231 DIGITAL EQ 2x 31 BAND
CLIP
L
CLIP
R
24 BIT DUAL DSP PROCESSOR
11 12 13
Typ/Type:
Spannungsversorgung:
Power supply:
Gesamtanschlusswert (max.):
Power consumption (max.):
1=GND
SIGNAL
Sicherung/Fuse:
GND
MIDI OUT MIDI THRU MIDI IN
2
EDIT
14 15
OUTPUT 2 INPUT LEVEL
OMNITRONIC DEQ-231
115V / 230 V AC, 50/60Hz ~
-20 dB
10 W
T 0,125 A
OMNITRONIC SHOWEQUIPMENT GmbH, GERMANY
17/22
3 4 5
PROGRAM CH SELECT EDIT
A B C
MIDI
FREQ/ GAIN LOCK / ESC BYPASS
6 7 8
16 14 15
INPUT 2 OUTPUT 1 INPUT LEVEL
+4 dB -20 dB +4 dB
10356120_V_1_0.DOC
16
INPUT 1