Child Lock; Cleaning And Maintenance; Risk Of Electric Shock - GUTFELS INDUK 2020 Gebrauchs- Und Montageanweisung

EN
Timer function
The timer can only be used during
operation. The timer can be set from 1
to 99 minutes.
1. When the appliance is in
operation, press the "Timer"
button.
à Display indicates "00" and
flashes.
2. Turn the "temperature regulator"
clockwise to increase the time.
à After 5 seconds, the appliance
starts the timer.
3. Press the "Timer" button again to
end the timer function.
Turn the "temperature regulator"
clockwise to increase the time by 10
minutes. Turn the "temperature
regulator" anti-clockwise to decrease the
time by 1 minute.

Child lock

The control panel can be locked to
prevent unauthorised use.
1. Press "Lock" and the control panel
is locked except for the "On/Off"
key.
à "Lock" light up.
2. Press "Lock" for 2 seconds to
deactivate the child lock.
8 Cleaning and
maintenance
Before carrying out any cleaning or
maintenance work, switch o ffthe
appliance, disconnect the mains plug
from the socket and allow it to cool down
completely.
WARNING

RISK OF ELECTRIC SHOCK!

Leaks on the induction hob
Never use a steam cleaner for cleaning.
Moisture could get into electrical
components.
Page | 18
CAUTION
DANGER OF SCALDING
FROM HOT WATER DURING
CLEANING.
Select the water temperature so that
there is no risk of scalding!
CAUTION
RISK OF CUTTING INJURIES
WHEN USING RAZOR-BLADE
SCRAPERS.
Clean the induction hob with a damp
cloth and wipe dry with a dry cloth.
Clean the induction hob with hot water
and washing-up liquid or with a
commercially available ceramic hob
cleaner.
Wipe up spilled food, food residues and
splashed fat immediately.
In the following cases, immediately
switch the power supply to "off" and
in case of residues of sugar, clean
the surface with hot water.
In the cases of small pieces of
aluminium foil or accidentally
melted plastic material, carefully
clean the surface with hot water
and a razor-blade scraper.
Remove stubborn soiling using
special cleaning agents.
If it is not possible to correct the
error, please contact After Sales
Service.
On no account should you carry
out any further work, particularly
not on the electrical parts of the
appliance.