Eldom nela C265B Bedienungsanleitung Seite 10

OPERATING INSTRUCTION
EN
CORDLESS KETTLE C265B/C265C
GENERAL DESCRIPTION
1. Spout + net filter
2. Opening lid
3. Handle
4. Water level indicator
5. On/off switch + control lamp
6. Rotating base
OPERATION
Cordless kettle C265B/C265C is for boiling water. It is possible to boil 0.5 – 1.7 litre of water in
the kettle.
The kettle base (6) must be put on a flat and dry surface. In the base there is some space for an
excess cord. It is important for the cord to be led from the base (6) through a special groove so
that the appliance could be stable. Before using the kettle for the first time fill it up (2-3 times)
with water, boil the water and then empty the kettle.
The kettle can be filled with water directly through the spout (1) or after opening the lid (2).
The kettle must not be filled up when on the base.
The kettle starts working after putting the switch (5).
The kettle working is signalled by the control lamp (5).
The kettle switches off automatically after the water has boiled.
You can stop heating water at any time by putting the switch (5).
CLEANING AND MAINTENANCE
- Allow the unit to cool down completely before cleaning.
- Do not immerse the kettle in water while washing up.
- The outside of the kettle may be wiped over with a damp cloth and washing-up liquid,
- Water stains inside the kettle can be removed by rubbing with a cloth moisten with white
vinegar; rinse the inside with water afterwards.
- Limescale should be removed in the following way:
- Fill the kettle with 0.75 litre of water and bring it to boil.
- Switch the kettle off and disconnect the kettle from the power supply.
- Pour 0.1 litre of white vinegar into the kettle.
- Allow to stand overnight.
- Discard the solution and rinse the inside with water.
- Fill the kettle with 1 litre of water and bring to boil.
- Discard the water and rinse the inside with water.
10 EN
TECHNICAL DATA
- power: 2000W
- mains voltage: 230V ~ 50Hz
- 1.7 litre capacity