General-Setup-Page - Reflexion DVD1017 Bedienungsanleitung

MENU-NAVIGATION-DVD-MODE
The device starts automatically in DVD mode. To switch from Digital
TV mode to DVD mode, press the "SOURCE" button. Use the
„▲ / ▼" buttons to navigate in the menu. Select the menu item
"DVD". Confirm the entry with the „ENTER" button to enter the DVD
mode.
Press the „SETUP" button to open the setup menu for the
1.
DVD mode.
Press the „▲ / ▼ / ◄ / ►" buttons to navigate in the
2.
menu.
Press the „ENTER" button to confirm a menu entry.
3.
Press the „◄" button to return to the previous menu item
4.
in the setup menu.
Press the „Setup" button to close the setup menu.
5.

GENERAL-SETUP-PAGE

TV Display:
Select the display format to match the media being played. The
following settings are available:
4:3 Panscan / 4:3 LetterBox / 16:9 / Wide Squeeze
ANGLE MARK:
Display the currently set angle at the right corner on the screen, if
available on the DVD.
OSD LANGUAGE:
Set the menu language of the setup menu.
CLOSED CAPTIONS:
Closed captions are data that are hidden in the video signal of some
discs. Before you select this function, please ensure that the disc
contains closed captions information and your TV set also has this
function.
SCREEN SAVER:
This function is used to turn the screen saver "ON" or "OFF".
AUTO-STANDBY:
Sets the time after which the unit should automatically go into
standby mode. The following settings are available:
3 hours / 4 hours / Off
Note:
If the option is set to 3 hours, the device automatically goes into
standby mode after 3 hours if no button is pressed.
Note:
If a button on the remote control or on the device is pressed within
the set option, the setting is reset and the time starts from the
beginning.