Schwamborn STS 400 Gebrauchs- Und Wartungsanleitung Seite 23

17. REPLACE LONGBAG
1.
Cut the Longbag.
4.
Insert the new Longbag with
the inner part facing
upwards.
8.
Insert the container with the
Longbag.
2.
Pull and turn the retaining bolts on the
Longbag holder to loosen them.
5.
Cut and remove the
closing bands.
9.
Pull and turn the retaining bolts to
lock them in place.
3.
Remove the holder with the
remaining Longbag.
6.
Keep the inner part of the
bag outside the container
and pull it slightly.
7.
Pull the outer part of the
Longbag to create the new bag.
10.
Pull the Longbag and place
the stripes at the end to
make a new bag.
If necessary, use two cable
ties.