Safety Instructions - Schwamborn STS 400 Gebrauchs- Und Wartungsanleitung

05. PERFORMANCE TOLERANCES
The performance of the turbine may vary by 15% based on the temperature and air humidity.
The safety valves are calibrated based on the amperage of the turbine.

06. SAFETY INSTRUCTIONS

• Carefully read the instructions in this manual before starting, using, servicing or operating the vacuum
cleaner
• Check that the vacuum cleaner hasn't been damaged in any way
• Never turn on the machine if it is faulty or if you suspect it is faulty
• Check that the switch isn't worn or damaged
• Do not approach the suction intake of the machine with unfastened or broken garments that could easily be
sucked into the machine
• Check that the filters are present and efficient
• Make sure that the filters are installed correctly and in full working order, always observing the regulations in
force in the workplace
• Never use gasoline, solvents or other flammable liquids for cleaning; only proper detergents should be used
• Never move the machine by pulling the power cable or flexible hose
• Never direct the opening of the machine or the flexible tube towards people or animals
• Check that the machine is connected to a power source with the correct voltage indicated on the registration
plate
• Make sure that the power cable has no wear or damage.
If replacing the cable, always replace it with another of the same specifications as the original one: cables that are
not approved or of inferior quality may overheat and cause serious injury to the user
• Make sure that the machine is connected to an appropriate power source in full working order
• Repairs must only be carried out by authorised personnel and only when the machine is turned o and
disconnected from the power source
• Never allow unauthorized persons to use the machine
• Make sure that all safety devices are in full working order before turning on the machine
• Never cover the vacuum cleaner during use