Periodical Maintenance; Product Disposal - Schwamborn STS 400 Gebrauchs- Und Wartungsanleitung

07. INSTALLATION
7.1 DELIVERY AND HANDLING
All vacuum cleaners are carefully tested and checked by Schwamborn Gerätebau GmbH before delivery.
The vacuum cleaner is transported inside a protective box or wrapped in a protective film that allows the courier to
see the item during transport and is securely fixed to a pallet. If any parts have been damaged during transport, fill
in an immediate complaint with the courier. Parts that have been damaged or broken due to incorrect transport or
handling of the machine will not be recognised by the manufacturer's warranty. The machine must be lifted and
moved using a forklift truck in accordance with the relevant safety regulations in force in the workplace
7.2 CHECK THE PROPER ELECTRICAL CONNECTION
Connect the industrial plug to the power cable and connect the plug to a socket that has the same amp rating and
is protected by a line-isolating switch; in the case of the three-phase vacuum cleaner, it is necessary to check
before use that the motor rotates in the correct direction (clockwise) as shown by the die-cast indicator on the
turbine; if rotation occurs in an anti-clockwise direction, it is necessary to disconnect the machine from the power
source, invert one of the three phase cables inside the plug and check again for correct rotation.

08. PERIODICAL MAINTENANCE

Maintenance and cleaning operations must ALWAYS be carried out when the vacuum is turned off and
disconnected from the power source. No particular measures must be taken for the maintenance, cleaning or
lubrication of the suction unit. However, it is important to remember that correct use and servicing are essential if
the safety and efficiency of the vacuum are to be guaranteed.
To ensure regular and constant operation and to prevent the warranty from becoming void, always use original
Schwamborn spare parts when repairs are needed.
8.1 BEFORE TURNING ON AND TURNING OFF EVERY DAY
• Visually check that the cable has not been damaged in any way (it must not be damaged, torn, crushed)
• Check that the electrical switches are properly working and not damaged in any way
• Check the level of waste inside the main barrel.
N.B. Empty the main barrel if you are using an ATEX model.
• Check that the suction hose has not been damaged in any way.
• Check that the filters are correctly positioned on the filter chamber and the main barrel.
• If the vacuum cleaner is moved, ensure that the power voltage of the play in this new location corresponds to the
one on the technical data plate.
8.2 AT EVERY 200 HOURS OF OPERATION
• Check the condition of the primary filter: it must not have tears, holes or other damage: in this case replace it
(see chapter 14.)
• Check that the technical data plate is legible and not damaged in any way: contact the manufacturer for a
replacement if necessary

09. PRODUCT DISPOSAL

Dispose of the vacuum cleaner and any accessories according to the legislation of the country.
In order to prevent damage to the environment or the health of others and other people, the vacuum cleaner
should be separated from other wastes and, if necessary, recycled accordingly.
MAINTENANCE PERFORM ALL 10 HOURS OF OPERATION,
IF THE VACUUM CLEANER IS AN ATEX MODEL