Door Reversibility - Electrolux ERW0673AOA Benutzerinformation

8 www.electrolux.com
3.3 Electrical connection
• Before plugging in, ensure that the
voltage and frequency shown on the
rating plate correspond to your
domestic power supply.
• The appliance must be earthed. The
power supply cable plug is provided
with a contact for this purpose. If the
domestic power supply socket is not
earthed, connect the appliance to a
separate earth in compliance with
current regulations, consulting a
qualified electrician.
• The manufacturer declines all
responsibility if the above safety
precautions are not observed.
• This appliance complies with the
E.E.C. Directives.
3.4 Levelling
When placing the appliance make sure
that it stands level. This can be achieved
by two adjustable feet at the bottom in
front.
3.5 Installing the upper bracket
Fasten your appliance:
• Use two screws to install the upper
bracket on the top of the appliance.
• Put the appliance in the cupboard and
use two screws to fix the upper
bracket on the cupboard.

3.6 Door reversibility

WARNING!
Before carrying out any
operations, remove the plug
from the power socket.
Tools you need:
• cross-shaped screwdriver,
• putty knife or thin-blade screwdriver.
1. Make sure the appliance stands
upright.
2. Open the door and remove all wine
bottles from the shelves. Close the
door.
3. Unscrew the 4 screws that connect
the bottom hinge. Put the bottom
hinge in a safe place together with
the screws.
4. Remove the door and put it on a soft
surface.
5. Unscrew the screws that connect the
upper hinge at the top right corner of
the appliance. Put the upper hinge in
a safe place together with the
screws.
6. Use a putty knife or a thin blade
screwdriver to remove 3 screw hole
covers from the left upper corner of