AEG ABSOLUTE 8000 Gebrauchsanweisung Seite 9

TROUBLESHOOTING
PROBLEM
Soleplate is not heating even
though iron is turned on.
Iron does not produce steam.
Steam boost and vertical steam
boost function does not work.
Water leaks from the soleplate
during ironing.
Flakes and impurities come out of
the soleplate during ironing.
Water leaks from the soleplate
while the iron is cooling down or
after it has been stored.
Brown streaks come out of the
soleplate while ironing and stain
the linen.
DISPOSAL
This symbol on the product indicates that this product contains a battery which shall not be disposed with
normal household waste.
This symbol on the product or on its packaging indicates that the product may not be treated as household
waste. To recycle your product, please take it to an official collection point or to an AEG service center that
can remove and recycle the battery and electric parts in a safe and professional way. Follow your country's
rules for the separate collection of electrical products and rechargeable batteries.
AEG reserves the right to change products, information and specifications without notice.
www.aeg.com
Lavignia_Absolute_8000_SteamStation_AEG_180918.indd 9
POSSIBLE CAUSE
Connection problem
Temperature control is in "Outdoor"
position.
Not enough water in tank.
Selected temperature is lower than that
specified to use with steam.
Steam boost function was used very
frequently within a short period.
Iron is not hot enough.
The iron is not hot enough.
You have used hard water, which has
caused scale flakes to develop in the
water tank. Clean the station with
descaler (see "Cleaning", no 14).
The iron has been put in horizontal
position while there is still water in the
water tank.
You may have used chemical
descaling agents different from the
recommendation.
Fabric fibers have accumulated in the
holes of the soleplate and are burning.
Fabrics might not be properly rinsed or
the garments are new and have not been
washed before ironing.
SOLUTION
Check main power supply cable, plug and
outlet.
Select higher programme like "
Fill water tank (see "Getting started", no 2).
Increase temperature to at least "
Put iron on horizontal position and wait before
using steam boost function.
Adjust the proper temperature to steam
ironing (up to " Cotton"). Put iron in vertical
position and wait until temperature indicator
light turns off.
Set the temperature dial to a temperature
(" Cotton" to maximum) suitable for steam
ironing. Put the iron on its heel and wait until
the headlight is on before you start ironing.
Press and hold the steam button for about
one minute to get steam. Then hold one more
minute in order to clean the steam generating
system. Before starting ironing, please test
your iron on an old towel to ensure that no
residues inside the iron are transferred to your
garments.
Empty the water tank and switch off the steam
station by pressing ON/OFF button (M) on the
boiler unit before storing the iron.
Use the descaling agent from the
recommendation (see "Cleaning", no 14).
Clean the soleplate with a damp soft cloth.
Please rinse the fabrics properly before ironing.
GB
DE
AR
ES
Cotton".
FA
FR
Cotton".
GR
NL
PT
9
2018-09-18 12:57:24