Disposal Of Your Old Appliance; Safety Warnings; Installation Information - Sharp SJ-TA35GHDI2-EU Bedienungsanleitung

CHAPTER -1: GENERAL WARNINGS
Disposal
• All packaging and materials used are environmentally friendly and recyclable. Please dispose of any packaging
in an environmentally friendly manner. Consult your local council for further details.
• When the appliance is ready to be scrapped, cut off the electrical supply cable and destroy the plug and cable.
Disable the door catch in order to prevent children getting trapped inside.
• A cut-off plug inserted into a 16 amp socket is a serious safety (shock) hazard. Please ensure the cut-off plug
is disposed of safely.

Disposal of your old appliance

This symbol on the product or package shows that the product should not be treated as domestic waste.
Instead, it should be taken to applicable waste collection sites that recycle electrical and electronic
equipment. Recycling materials will help preserve our natural resources. For more detailed information
regarding recycling this product, please contact your local authority, domestic waste disposal service, or
the shop where you purchased the product.
Please ask your local authority about the disposal of WEEE for reuse, recycle and recovery purposes.
Notes:
• Please read the instruction manual carefully before installing and using your appliance. We are not responsible
for damage resulting from misuse.
• Follow all instructions for your appliance, and keep this manual handy in order to resolve any problems that
may occur in the future.
• This appliance is produced to be used in homes and can only be used in domestic environments and for the
specified purposes. It is not suitable for commercial use. Such use will nullify the warranty and our company
will not be responsible for any losses that occur.
• This appliance is produced for home use and it is only suitable for cooling / storing foods. It is not suitable for
commercial or use and / or for storing any substances except for food. Our company is not responsible for any
losses due to improper use.

Safety warnings

• Do not connect your Fridge Freezer to the mains electricity supply using an extension lead.
• A damaged power cord / plug can cause fire or give you and electric shock. When damaged it must be
replaced, this should only be done by qualified personnel.
• Never bend the power cord excessively.
• Never touch the power cord / plug with wet hands as this could cause a short circuit electric shock.
• Do not place glass bottles or beverage cans in the freezer department. Bottles or cans may explode.
• When taking ice made in the freezer department, do not touch it, ice may cause ice burns and/or cuts.
• Do not remove items from the freezer if your hands are damp or wet. Tis could cause skin abrasions or frost /
freezer burns.
• Do not refreeze food once it has thawed out.

Installation Information

Before unpacking and manoeuvring your fridge freezer please take some time to familiarise yourself with the following
points.
• Position your fridge freezer out of direct sunlight and away from any heat source such as a radiator.
• Your appliance should be at least 50 cm away from stoves, gas ovens and heater cores, and should be at least
5 cm away from electrical ovens.
• Do not expose your fridge freezer to moisture or rain.
• Your fridge freezer should be positioned at least 20mm away from another freezer.
• Clearance of at least 150 mm is required at the top of your appliance. Do not place anything on top of your
appliance.
• For safe operation, it is important that your fridge freezer is seated securely and balanced. The adjustable feet
are used to level your fridge freezer. Make sure that your appliance is level before placing any foodstuffs inside it.
• We recommend that you wipe all shelving and trays with a cloth soaked in warm water mixed with a teaspoon
of bicarbonate of soda before use. After cleaning, rinse with warm water and dry.
If your refrigerator has a fan condenser:
The condenser of your fridge is placed at the bottom of cabinet. As a
result of that, assemble the spacer by fixing it to holes on the cover
bottom panel and turn 90° that's shown below figure for arranging the
distance between the refrigera¬tor and the back wall at where you
place the fridge. You can move the fridge towards the back wall until
that point.
Plastic for distance setting
EN -4-