1. Technical Data
Modell
Input Voltage
Output
Power consumption
Ambient temperature
Dimensions
Net-weight
2. Specifications
1. Power supply through DALI-BUS possible
2. Connected to 100-240 VAC, than a 125 mA DALI-BUS current will be generated
3. Up to 2 controllers at 100-240 VAC possible, additional 2 controllers with DALI-BUS supply
possible
4. Up to 50 DALI receiver can be controlled, when connected to 100-240 VAC
5. Campatible with many different frames
6. Signal as Braodcast commant to all connected DALI devices
3. Usage manual
PROLED DALI CONTROLLER UNIVERSAL MASTER has a build in DALI-BUS- power supply, which can supply
DALI BUS, when connected to 100-240 VAC mains. Controller can be also supplied by DALI-BUS, when not
connected to 100-240 VAC.
Max. 2 DALI Controller can be connected to 100-240 VAC mains. Further Controllers must be supplied
by DALI-BUS.
Every BUS can controll up to 100 DALI devices. On one DALI-BUS-Line you can connect up to 4 controllers.
ON/OFF switch
Press the knob of DALI controller to switch light on or off.
Increase or decrease light brightness
Turn the knob clockwise to increase the brightness from 1% up to 100%.
Turn the knob counterclockwise to decrease the brightness from 100% to 1%.
Set the minimum brightness value
To set the current brightness value as the minimum brightness value for dimming, press and hold down the
knob for more than 5 seconds, until the light flashes. It is now dimmable from this minimum brightness value to
100%.
Delete the minimum brightness value setting
Click the knob to switch off the light first, then press and hold down the knob over 5 seconds until the light
flashes. The minimum brightness value will be deleted. It is now dimmable from 1% to 100%.
MBN GmbH, Balthasar-Schaller-Str. 3, 86316 Friedberg - Germany
PROLED DALI CONTROLLER UNIVERSAL MASTER
100-240 VAC or DALI BUS
DALI Broadcast Signal, 125 mA DALI BUS
< 3 W
-10°C – 45°C
71 mm × 71 mm x 33 mm (LxBxT)
70 g
IP 20
www.proled.com
Users manual / Bedienungsanleitung