Connect To Power - Sharp HT-SB140 Benutzerhandbuch

HDMI ARC input
The ARC (Audio Return Channel) function
allows you to send audio from your ARC-
compliant TV to your sound bar through a
single HDMI connection. To enjoy the ARC
function, please ensure your TV is both
HDMI-CEC and ARC compliant and set up
accordingly. When correctly set up, you
can use your TV remote control to adjust
the volume output (VOL +/- and MUTE) of
the sound bar.
– Connect the HDMI cable (not included)
from unit's HDMI (ARC) socket to the
HDMI (ARC) socket on your ARC com-
pliant TV. Then press the remote control
to select HDMI ARC.
TIPS:
• Your TV must support the HDMI-CEC
and ARC function. HDMI-CEC and ARC
must be set to On.
• The setting method of HDMI-CEC and
ARC may diff er depending on the TV.
For details about ARC function, please
refer to your TV owner's manual.
• Only HDMI cables of version 1.4 or
higher can support the ARC function.
OPTICAL input
• Remove the protective cap of the
OPTICAL socket, then connect an OP-
TICAL cable (not included) to the TV's
OPTICAL OUT socket and the OPTICAL
socket on the unit.
TIP:
While in HDMI ARC/OPTICAL mode, if
there's no sound output from the unit
and the HDMI ARC/OPTICAL lights fl ashes
quickly, you may need to activate PCM
signal output on your source device (eg.
TV, DVD or Blu-ray player).
AUX
A. Use a RCA to 3.5mm audio cable (not
included) to connect the TV's audio
output sockets to the AUX 1 socket
on the unit.
B. Use a 3.5mm to 3.5mm audio cable
(not included) to connect the TV's
or external audio device headphone
socket to the AUX 1 socket on the unit.
TIP:
When you use the headphone output on
the TV set, you will be able to adjust the
volume level directly using the TV remote
control.
EU
UK

Connect to Power

• Before connecting the AC power cord,
ensure you have completed all other
connections.
EN EN