Supplied Accessories - Panasonic Lumix H-XA025 Bedienungsanleitung

– When attaching or removing the lens, be careful so
that foreign objects such as sand, dust, and water
droplets do not adhere to or enter the lens mount
rubber, contact points, digital camera and lens.
– If the lens is exposed to water droplets or other
liquids, wipe them off with a soft, dry cloth.
To improve the dust and splash resistant performance
0
of the lens, a lens mount rubber is used in the mount.
– The lens mount rubber will leave scuff marks on the
digital camera mount, but this does not impact
performance.
– For information on changing the lens mount rubber,
contact Panasonic.
∫ Condensation (when the lens is fogged up)
Condensation occurs when the ambient temperature or
0
humidity changes. Please be careful, as it may cause
lens stains, mold and malfunction.
If condensation occurs, turn off the digital camera and
0
leave it for approx. 2 hours. The fog will disappear
naturally when the temperature of the digital camera
becomes close to the ambient temperature.
The appearance and specifications of products
0
described in this document may differ from the actual
products you have purchased due to later
enhancements.
18
DVQX1990
(ENG)

Supplied Accessories

Check that all the accessories are supplied before using
the product.
Product numbers correct as of August 2019. These may
be subject to change.
1 2
VFC4456 DZE2HXA025Z
1 Lens pouch
2 Lens hood
3 Lens cap
¢
4 Lens rear cap
¢
Fitted to the lens at the time of purchase.
¢
3 4
VYF3510 VFC4605