Getting Started - Wisenet SEP-102CRW Bedienungsanleitung

Getting Started

Powering Your System
1.
Connect the camera to the power adapter. Plug the adapter into an outlet. Camera must be plugged in
at all times.
2. Turn the power switch to "On" to power the camera. A red LED indicator will illuminate if it is turned on.
Only use the enclosed Camera Power adapter.
`
n
Pairing Camera and Monitor
The units already come paired for your convenience.
The pair button is used to pair additional cameras. Users can assign numbers to the
cameras. Up to 4 cameras may be paired.
If you have an additional camera, pair your camera as follow:
1. Turn on the wireless monitor and new camera.
2. Press the "OK" button to make the settings icon appear on the screen.
3. Select [
] icon.
4. Select the camera number in the pair/unpair channel list.
The monitor will search for the new camera when set to pairing mode.
A 30-second countdown will appear and start on the middle of the screen.
5. Press the [PAIR] button located on the rear of the camera.
6. If the monitor successfully pairs with the camera within the 30 second countdown period, the monitor will
automatically switch to display the view of the newly paired camera.
English · 6