Comedes BTR 50 Handbuch Seite 39

Maintenance intervals:
Maintenance and
service interval
Check air inlet and
outlet and remove im-
purities. (Fig 1, Fig 2.)
External cleaning
Visual inspection of
the water outlet (hose
connection) for conta-
mination
Check air filter for dirt
and foreign bodies,
clean or replace if ne-
cessary
Check device for da-
mage (power cable,
housing, tank, fan
wheel)
Trial run
Empty tank or check
hose drainage
Visual inspection of
the sockets used.
Testing of the RCD
(ground fault circuit
interrupter).
Check air inlet and air outlet
The unit sucks in air from the front (Fig. 1) and blows it out from the side (Fig. 2). Make sure
that the air inlet and outlet are not blocked and check this each time you use the unit. Make
sure that no objects or walls obstruct the air inlet or outlet and observe the distance rules.
Check the drainage hose:
Check the hose used for hose drainage regularly for blockages and damage. If the hose is
clogged or damaged, replace it with a new one.
Storage of the dehumidifier
If the dehumidifier is not used for a longer period of time:
1) Switch on and disconnect the device.
2) Empty the water tank completely and make sure that there is no more water in the
appliance.
3) Remove and clean the dust filters. Make sure that
before reinstalling them.
4) Bundle the power cable and attach it to the cable holder on the back of the device.
5) Store the dehumidifier in a cool dry place. Keep the device
sunlight, high/low temperatures and high dust exposure.
EN-18
before
At
each
De-
Commis-
mand
sioning
X
X
X
X
X
X
X
At least all At least all
2 weeks 4 weeks
X
X
X
the filters are completely dry
At least all
6 months
away from direct
www.comedes.com
At least
annually
X
X
X