Herunterladen Inhalt Inhalt Diese Seite drucken

Patton Patio Chef Serie Gebrauchsanweisung Seite 38

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 48
Use the burners only in the way indicated on the drawing, if you prepare the food with the lid closed.
l
Before you light the grill, open the lid.
l
Place the flame distributor, the grill plate or panel on the middle burners. Close the lid and turn the operating switch
l
into „LO" position.
Maintain the temperature maximally 200 o C.
l
If you want to bake the food, place the food in the middle of the grill, for example on a reversed cooking plate.
l
Regular supervise the baking process.
l
WHAT TO DO IF YOUR GRILL DOES NOT WORK
Smoking during checking of the grill is prohibited!
l
Turn the operating switch into "OFF" position and close the gas supply.
l
Before next try, wait 5 minutes.
l
Check the gas outflow.
l
Repeat the ignitron procedure, if the grill is still not working, CLOSE THE GAS SUPPLY AND TURN THE
l
OPERATING SWITCHES IN THE „OFF" POSITION. Wait, the grill is cooled down an check the following elements:
a)
Connection of the burners conductors in the openings.
CORRECTION: Carry through the burner hose in a correct manner.
b)
Clogged gas conductor.
CORRECTION: Disconnect the gas hose from the grill.
Open the gas flow for 1 second, to unstop the hose. Close the gas inflow (close the gas bottle valve) and connect
the gas hose to the grill.
c)
Clogged orifice
CORRECTION: Remove all loose parts from the inside of the grill. Unscrew the burner and remove the splint from
the Lower part of the grill base, using a screwdriver and pliers. Raise each burner from the gas opening, the clogged
places unstop using a thin needle. Place the burners again in the openings and fasten on the grill base. Insert the
remaining loose parts.
d)
Connection of the burner igniter
CORRECTION: The electrode tip should reach the burner/ collection box. The orifice between the spark electrode
and the burner tip/ collection box should be 3-5 mm. When needed, can be adjusted through carefully bending.
If it will be necessary to lighting a hot grill, first you should wait at least 5 minutes.
(This will give an opportunity for gas dissipation).
If all checks/ repairs will be executed and your grill still will not property working, please contact your distributor or gas
installation specialist.
GB, IE
38

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Patio chef 2+-burnerPatio chef 3+-burner

Inhaltsverzeichnis