Product Disposal - Zelmer ZCK8023 Benutzerhandbuch

Once the boiling process is finished, the all-time bright blue encircled lamp of temperature button
become to flicker, and the red encircled lamp of "standby" button
Push the "keep warm" button
button, the kettle will heat discontinuously to keep the target temperature.
To turn off the base, press and hold the On/Off button for more than 3 seconds, it will beep twice and
turn off.
Warning: If you remove the kettle from the base and replace it before the heating process is over, the
kettle will continue to heat the water.
Only operate the kettle with the lid closed and the limescale filter inserted.
After boiling, let the kettle cool down for 5 minutes before refilling it with water.
Do not turn on the appliance if the kettle is empty, otherwise the overheat control will engage and the
appliance will switch itself off automatically.
MANITENANCE AND CLEANING
1.
Do not forget to remove the plug from the socket before cleaning the appliance.
2.
Wipe outside with soft dry cloth when the kettle is wet, never use metal polish.
3.
Remove the limescale filter soak it in a little vinegar, then rinse clean with clear water
4.
Never use a dishwasher to clean any parts from the machine.
5.
Rinse the kettle and the limescale filter with clear water
6.
Put the water kettle in a dry and not very hot place.
DESCALING
Regular descaling makes your kettle last longer, ensures proper function and saves energy.
Descale the kettle with vinegar or a commercial descaling agent.
Fill the kettle with water up to the max mark and bring to a boil. Next add a small amount of white
vinegar and let it sit for a couple of hours. You can also use a commercial descaling product and follow
the manufacturer's instruction.
Rinse the kettle with clear water.
If you use the kettle daily, descale more frequently.

PRODUCT DISPOSAL

This product complies with European Directive 2012/19/EU on electrical and electronic devices,
known as WEEE (Waste Electrical and Electronic Equipment), provides the legal framework
applicable in the European Union for the disposal and reuse of waste electronic and electrical
devices. Do not dispose of this product in the bin, instead going to the electrical and electronic
waste collection centre closest to your home.
We hope that you will be satisfied with this product.
, can choose "70/80/90ºC" target temperature, then push the standby
turn to green.
EN PL
11