HP DesignJet T1600 Serie Einführende Informationen Seite 8

At the top of the all-apps page there is a dashboard that displays alerts related to the main functions of the printer.
Swipe down the dashboard to access the Status Center.
The front panel has a large central area to display dynamic information and icons. On the left side you can see three
fixed icons at different times. Normally they are not all displayed at the same time.
All-apps page dynamic icons
Print a file from USB.
View ink levels and perform ink-supply
operations.
Perform operations to improve the print
quality.
View and change specific printer settings.
Access to the user guide.
If the printer is left idle for some time, it goes into sleep mode and switches off the front-panel display.
To change the time that elapses before sleep mode, tap
set a time between 5 and 60 minutes; the default time is 15 minutes. This time includes 5 minutes in dim mode.
The printer can be woken from sleep mode by the power button, by sending a print job, by opening a cover, or by
tapping the front panel.
You can use the printer's auto-off feature to turn the printer off automatically. Setting it to 2 hours turns the printer
off after 2 hours of inactivity. In this way, you can save more energy.
The auto-off feature is automatically disabled when the printer is connected to the network, to avoid
inconveniencing network users. Auto-off can be re-enabled if required.
Front panel (HP DesignJet T2600 Multifunction Printer)
The front panel is a touch-sensitive screen with a graphical user interface, located on the front right of the printer. It
gives you complete control of your printer: from the front panel, you can view information about the printer, change
6 HP DesignJet T1600 Printer Series and HP DesignJet T2600 Multifunction Printer
Perform paper operations, such as loading
paper.
View and manage the job queue.
View and configure the printer's network
settings.
View information about the printer's usage of
paper and ink.
Find information about the printer.
, then System > Power options > Printer sleep. You can
ENWW