Siemens Fujitsu D2721 Kurzbeschreibung Seite 17

Procedure
► Remove any fan and the heat sink.
► Pull the lever in the direction of the arrow (1) and lift it as far as it will go (2).
► Fold up the frame.
► Remove the old processor from the socket (3).
► Insert the new processor in the socket so that the bevelled corner of the processor
matches the coding on the socket (A) with regard to the position (4).
► Push the lever back down until it clicks into place (5).
► Depending on the configuration variant, you must pull a protective foil off the heat sink
or coat the heat sink with heat conducting paste before fitting it.
► Depending on the processor variant, clips may also be supplied for mounting
the heat sink that fix it in place.
A26361-D2721-Z110-1-7419, edition 3
Downloaded from www.Manualslib.com
2
3
1
The bevelled corner of the processor may be in a different position
from that shown in the illustration.
Please note that, depending on the heat sink used, different heat sink
mounts are required on the mainboard.
manuals search engine
Brief description of mainboard
4
5
A
English - 3