Topcom Skyr@cer Pro WBR 654 Schnelle Installationsanleitung Seite 10

- PPPoE to obtain IP automatically: mostly used for connecting the WBR654 to an ADSL-Ethernet Bridge with
PPPoE dial up.
- PPPoE with a fixed IP address: PPPoE connection with fixed WAN IP address.
- PPTP: for setting up a VPN connection: in this case the WBR654 WAN port is connected at the LAN site of another
existing network !
• Now you can setup the basic settings for the Wireless part.
10
Downloaded from www.Manualslib.com
- enter username and password (twice)
- Click Next to proceed.
- enter username, password (twice) and WAN IP address
- Click Next to proceed.
- enter the VPN IP address, Subnet Mask and Gateway.
- enter the VPN Server IP address, PPTP Account and Password (twice).
- Click Next to proceed.
- Select Enable to enable the Wireless LAN
- Choose an SSID and a Channel for your wireless network. Please make sure that the wireless
clients will operate on the same SSID and the same channel to make wireless data
communication possible.
- Click Next to proceed.
manuals search engine
Topcom Skyr@cer Pro WBR 654