Features; Package Contents; Mounting Bracket Installation - LEGRAND C2G C2G30024 Bedienungsanleitung

HDMI HDBASET + USB-B AND RS232 OVER CAT EXTENDER SINGLE GANG WALL PLATE
TRANSMITTER TO BOX RECEIVER - 4K 60HZ

Features

HDMI 2.0 with 4K@60Hz 4:4:4 8bit and HDCP 2.2 compatibility
•
Supports signal transmission up to 35m/115ft for 4K and 60m/197ft for 1080P via a
•
single Cat 5e/6 cable
Supports signal transmission up to 40m/131ft for 4K and 70m/230ft for 1080P via a
•
single Cat 6a/7 cable
Supports one-way PoH, the transmitter can be powered by the receiver
•
Supports USB pass-through and RS232 pass- through via HDBT port
•
Supports firmware upgrade through RS232 port, and can be set through the DIP switch
•

Mounting Bracket Installation

Note: Before installation, please ensure the unit is disconnected from the power
source.
1. Attach the installation bracket to the enclosure using the screws that were
provided in the package separately.
2. The bracket is attached to the enclosure as shown.
3. Repeat steps 1-2 for the other side of the unit.
4. Attach the brackets to the surface you want to mount to using screws (not
included).
4

Package Contents

1 x Transmitter
•
1 x Receiver
•
1 x DC 12V Adapter with US, UK, EU
•
and AU Cables
1 x Phoenix Connector (3.5mm, 2 Pins)
•
2 x Phoenix Connector (3.5mm, 3 Pins)
•
1 x 1 – Gang US Socket Cover, White
•
(with Screws)
2 x Mounting Bracket (with screws)
•
1 x Manual
•
(us)