Herunterladen Inhalt Inhalt Diese Seite drucken

Troubleshooting; Danger Of Electric Shock; Maximum Operating Time - Blaupunkt 5B50N8590 Bedienungsanleitung

Einbau backofen
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1

TROUBLESHOOTING

If a fault occurs, be sure that it is not due to incorrect operation before calling customer service.
First, try to correct the fault yourself using the following overview. You can often easily correct
technical problems with the appliance yourself.
If a dish does not turn out exactly as you would like it to, you will find many cooking tips and
instructions at the end of the operating manual.
Fault
Possible cause
Defective fuse
The appliance
does not work.
Power failure
The fan is not always switched on in
circulation mode.
After a cooking process, you can hear
a noise and observe a flow of air near
the control panel.
Food is not sufficiently cooked in the
time specified in the recipe.
Uneven browning
The lamp does not switch on.
Warning

– Danger of electric shock!

Incorrectly performed repairs are hazardous. Repairs and the replacement of damaged power
cables may only be carried out by one of our trained service technicians. If the appliance is
defective, disconnect it from the mains or switch off the circuit breaker in the fuse box. Contact
customer service.

Maximum operating time

The maximum operating time of this appliance is 9 hours, in case you forget to switch it off.
Comments/remedy
Check the circuit breaker in the fuse box.
Check that the kitchen lamp or other kitchen appliances
are working.
This is a normal process, ensuring the best possible
distribution of heat and the best possible performance of
the oven.
The fan is still running to prevent high levels of humidity in
the cooking chamber and to cool the oven down. The fan
will switch off automatically.
A temperature other than that specified in the recipe has
been used. Check the temperature setting. The ingredient
quantities differ from the recipe. Check the recipe.
The temperature setting is too high or the dish has not
been placed on the correct guide rail. Check the recipe
and the settings. The surface finish and/or colour and/or
material of the ovenware was not the best choice for the
selected oven function. If you use radiant heat, such as in
the "Top and bottom heat" mode, you should use matt,
dark-coloured, light ovenware.
The lamp must be replaced.
EN-24

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis