Mains Operation; Basic Functions - JGC -UR-210 Bedienungsanleitung

Mains operation

• Connect the power cord (21) with the AC~ connection (20) on the back of the radio.
• Make sure that your power supply corresponds to the information on the label of the radio. Connect the
power plug to a suitable power outlet.
• Pull the power plug out of the power outlet to completely cut off the power supply.
Turning the device on and off
• Turn the radio on using the ON/OFF button (6) on the top of the device.
• After you are finished using it, turn the radio off using the ON/OFF button again.
• The ON/OFF button does not cut off the power supply completely. To do this, pull the power plug out of the
power outlet.
Volume
• Set the desired volume by adjusting the volume control (12) on the radio.
• To decrease the volume, turn the volume control counterclockwise.
• To increase the volume, turn the volume control clockwise.
• Warning: Extremely loud volumes results in high sound pressure, which can cause irreparable hearing
impairments.
Keylock
• Slide the LOCK switch (13) upwards to the ON position in order to lock
all buttons except for the LIGHT button (4). A key symbol
shown in the display (11) (fig. 2).
• Slide the LOCK switch to the OFF position to unlock the keys. The key
symbol disappears.
Illuminating the display
• Press the LIGHT button (4) to turn on the blue display illumination. The display (11) will be illuminated for
approx. 7 seconds.
Connecting the headphones
• This radio is equipped with a 3.5 mm headphone jack (14) to which you can connect most commercially
available head- or earphones (not included).
• When the head- or earphones are connected to the headphone jack, then the integrated speakers are
automatically deactivated.
• As soon as you disconnect the head- or earphones from the jack, the speakers are activated again.
• A loudspeaker symbol
radio. When you disconnect the headphones from the jack, the symbol disappears.
JGC-UR-210-IM-DE-EN-V3.indb 23
will be shown in the display (11) when headphones are connected to the

BASIC FUNCTIONS

will be
Fig. 2
23
03/12/2009 10:41 AM