Stûv TULOX 100 Montageanleitung Seite 12

The locking direction of the lock can be adjusted to the required installation situation. The spring
and the cogwheel must be removed from the base plate for this purpose. The cogwheel can now
be turned in the desired position in 90° steps and both parts can then be re-assembled (Figure 3).
- 12 -
Installation Instructions TULOX 100 + 200
Pay attention that the cable is positioned around the
screw head and cannot be jammed.
Steinbach & Vollmann GmbH & Co. KG • 42579 Heiligenhaus
Cogwheel
Spring
Figure 2
Figure 3