Herunterladen Diese Seite drucken

Klimatronic CoolBreeze 2000 TV Bedienungsanleitung Seite 8

Tischventilator

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
Installation
Operation
The fan will stop swinging when the swing handle is pulled up.
The fan will swing and start blowing from left to right when the swing handle is pressed down.
The tilt angle can be adjusted up and down when moving the motor head.
Technical data
Item
Specs
Stop/Reset
Low power
High power
Rated voltage
Rated frequency
Input power
Operating system
Cleaning
Always disconnect the appliance from the power outlet before cleaning. Never immerse the appliance
in water to prevent electric shocks.
Wipe over the exterior of the appliance with a soft wet cloth and then wipe dry with a dry cloth.
Please do not use any aggressive or chemical cleaning agents or abrasive cleaning agents such as
steel wool.
If you do not use the appliance for a long period of time, please store it in a dry place protected from
dust.
In case of complaint
You can claim the device within 24 months from date of purchase (receipt).
A free replacement or repair will be excluded from prior improper product handling.
Defects in wear parts, consumables, as well as cleaning, maintenance or replacement of said parts are
therefore with costs.
If you want to make a complaint, please bring the entire device in its original packaging and with proof of
purchase to your dealer. For a timely and convenient service register, visit our website www.suntec-
wellness.de and learn more.
Without a proof of purchase, generally there will be no repair or replacement.
In the event that the complaint case is analogous to our terms of service, all defects of the device or its
accessories due to material or manufacturing defects will be eliminated by repair or, at our discretion,
replacing the unit.
The damage of accessories does not automatically lead to a free exchange of the whole device. In these
cases, please contact your dealer. Glass breakage, or breakage of plastic parts are always to charge.
The dealer or repair service can perform the repair after the expiration of warranty against charge.
200mm
0
1
2
220-240V~
50Hz
20W
continual
1
Base
2
Screw
3
Fan speed 0-2
4
Oscillation
5
Motor head
Loosen the adjusting screw by turning it
counter-clockwise until it completely comes out
of the base. Then, put the motor head on the
base, so both holes are parallel to each other
and fix them with the screw by turning it
clockwise.

Werbung

loading